B52 Aries Plus 2.0 - Remote Control Operations; Remote Control Programming

www.b52audio.com
2
REMOTE FUNCTION:
BUTTON FUNCTION STATUS
Press shortly Lock; Armed ACC OFF
Press shortly
Silent Armed ACC OFF
Press shortly
Unlock; Disarmed Armed
Keep press for 2 sec.
Trunk Release Any Status
Press + shortly
Shut Shock Sensor Armed
Press shortly Lock ACC ON
Press shortly
Unlock ACC ON
REMOTE PROGRAM:
Under the condition of disarmed, door be opened, ACC ON:
1) Press for 2sec, siren chirps once mean system with auto arming,central lock
will lock after 15sec.Siren chirps twice mean without;
2) Press for 2sec siren chirps once mean system with door delay function. Siren
chirps twice mean without;.
3) Press for 2sec siren chirps once mean system with door open alert.Siren chirps
twice mean without;
4) Press + for 2sec siren chirps once mean when enable engine start, after
3sec. central lock will lock automatically. Siren chirps twice mean without this function.
5) Press + for 2sec siren chirps once mean start the auto arming (but central
lock don’t lock the door). Siren chirps twice mean without this function.
6) Press + for 2sec. siren chirps once mean the system enter into valet
mode. Siren chirps twice to shut the function;
FUNCTION
SETTING / CHANGE
METHOD
SIREN CHIRPS
ONCE
SIREN CHIRPS
TWICE
Auto Arming with
Door Lock
Press
for 2 sec with ※ without
Door Delay Press for 2 sec Delay for 20sec. ※ without
Door Open Alert Press for 2 sec ※with without
Central Lock
Automation
Press
+ for 2 sec ※with without
Auto Arming
without Door
Lock
Press
+ for 2 sec ※with without
Valet Mode Press + for 2 sec with ※without
Notice: with signal “※” as factory setting before delivery.
To exit the remote program: after finish, shut the door or ACC off.