12
REMOTE CONTROL OPERATION
REPLACING THE BATTERY
When the operational range of the remote control becomes short or non functions while operating.
Replace a new CR2025 battery. Make sure the battery polarity before replacement.
1. Pull out Battery Holder while pressing the stopper.
2. Put the button type battery (+) mark upward into the Battery Holder.
3. Insert the Battery Holder into the Remote Control
Power Button
Press 1
button to turn power On/ Off.
Pause/ Play Button
Press 2 button to suspend the playback of CD, MP3, WMA, VCD and DVD, Press it again to
return to normal playback mode.
Mute Button
Press 3
button to cut down the sound output, press it again to resume the previous sound
level.
Menu Selector
Press 4
to select your desired menu, then press (6) (ENTER) or play button (2) to
confirm.
NOTE: This function works in main menu mode only, refer to page 12.
Band/ System Switch
During radio mode, Press 5) (BAND/ SYS) to switch receiving band.
During the player mode, press (5) (BAND/ SYS) button to switch to AUTO, PAL OR NTSC system.
To Next Page
Loading...