36 37
ERROR CODES
If the pedal assistance is not working properly, we recommend that you first check the
various cable connections and verify that the battery is sufficiently charged. As with any
electronic system, a malfunction is possible. If this is the case, please contact your Babboe
dealer so that any repairs can be performed quickly.
The following table shows the error codes and their significance in the system. Potential
causes and sources serve as a guideline to determining where the error may occur.
ERROR
CODE
DESCRIPTION POTENTIAL CAUSES POSSIBLE SOURCES
1 Current Detection Error Internal short circuit, MOSFET failure, current
detection failure
Controller
2 Battery Communication
Error
I2C bus failure, poor battery connection Battery, Controller
3 Battery Cell Voltage
Error
Single cell voltage below 2.56V or above 5.12V Battery, Controller
4 Temperature Error Temperature of battery >50 or <-20C of
controller > 80 or < -20C
Battery, Controller
5 Motor Stall Motor malfunction causing stalling Motor, Controller
6 Battery Calibration
Error
Real voltage and read voltage difference larger
than 0.1V
Controller
9 Communication Error No communication between display and
controller
Display, Controller
“The world at your feet,
and your kids right in
front of you”
To Next Page
Loading...
