Babboe Curve - Step 7.5: Attaching Steps to Side Panels

24
Step 7.5: A aching the steps to the side panels
The steps on the fenders must be connected to the side panels.
1. Screw both side panels onto the steps using two bolts and washers
(see Figure 26). The nuts are already a ached to the step for easier
a achment.
Important! Adhere to the specifi ed order for bolts and washers in order to
secure everything in the best possible way (see detail picture P).
Parts needed:
- Sachet G (4x M6 bolts, 4x M6 spring washers, 4x M6 washers)
Tools needed:
- Philips screwdriver
P.
26.
!