Babboe Curve - Step 7.7: Attaching Bottom Front Panel Section

26
Step 7.7: A aching the bo om sec on of the front panel
1
S.
28.
Parts needed:
- Bo om sec on of front panel (printed part) (Box III)
- Sachet I (2x M6 bolts (long), 3x M6 bolt (short), 5x M6 cap nuts,
5x M6 spring washers, 10x M6 washers, 2x plas c washers)
- Rubber strip (Box II)
Tools needed:
- Open-end spanner # 10
- Philips screwdriver
29.
T.