Babboe Curve - Step 7.8: Attaching Top Front Panel Section

28
Step 7.8: A aching the top sec on of the front panel
1. A ach the top sec on of the front panel to the connec on profi les (front)
using the nuts, bolts and washers from sachet J (see detail picture U).
Important! Adhere to the specifi ed order for nuts, bolts and washers in order
to secure everything in the best possible way (see detail picture U).
Parts needed:
- Top sec on of front panel (Box III)
- Sachet J (4x M6 bolts, 4x M6 cap nuts, 4x M6 spring washers,
8x M6 washers)
Tools needed:
- Open-end spanner # 10
- Philips screwdriver
31.
U.
!