Babboe Curve - Step 9: Attaching Pedals

34
Step 9: A aching the pedals
1. Tighten the axle of the right pedal (clockwise) in the crank using open-end
spanner # 15 (see detail picture AD).
2 Tighten the axle of the le pedal (counter-clockwise) in the crank using open-
end spanner # 15. (see detail picture AE).
Parts needed:
- Le pedal (marked “L”) (Box II)
- Right pedal (marked “R”) (Box II)
Tools needed:
- Open-end spanner # 15
AD.
AE.
38.