Babboe Curve - Step 10: Attaching Front Lights

35
Step 10: A aching the front lights
The delivered front lights must be a ached underneath the steps at the front of the
cargo box.
1. Slide the clamp of the light over the sec on of frame tubing under the step, as
illustrated in Figure 39.
2. Use the adjuster on the bo om of the clamp to fi rmly secure the holder to
the frame tube (see detail picture AF).
3. Finally, slide the light itself onto the holder.
Note: The lights can be operated via the hole in the step.
AF.
39.
Parts needed:
- 2 front lights (Box II)