Babboe Curve - Step 11: Assembling the Lock

36
Step 11: Assembling the lock
Note: This step only applies if you received the lock separately.
Important! To protect the fi nish of your Babboe Curve cargo bike, we
recommend that you apply masking tape or something similar to the fender
at vulnerable loca ons.
1. Place the lock over the fender and wheel as shown in Figure 40. This must be
done carefully in order to avoid damage. If necessary, let some air out of the
 res in order to make it fi t around the wheel.
2. Use the included bolts to a ach the lock at both sides of the frame.
40.
!
Parts needed:
- Lock
Tools needed:
- Philips screwdriver