36
EN
How to adjust the belts, headrest and seat positions
IMPORTANT: The correct belt height of the shoulder belts is attained when
the belt disappears into the shell slightly above the shoulder of the child. Make
sure that the shoulder belts t properly over the shoulders of the child.
1. Adjusting the belts
Loosen the harness straps by pressing the
release button and pulling the harness straps
as far as you can.
Do not pull the shoulder pads!
2. Ten heights of the headrest
The headrest can be set at ve different
heights in group 1 mode with the shoulder
belts axle in place. There are ve additional
positions in Group 2 and 3 mode once the
shoulder belts axle and harness straps has
been removed.
Press the button on the headrest handle on
the top of the seat.
It is important to make sure the headrest t
properly to head.
3. Stepless adjustment device
The recline angles of the car seat can be adjusted by front knob. Rotate
clockwise to add the recline angles, to reduce in the opposite, as shown from
the icon on the knob.
To Next Page
Loading...
