42
EN
Group i car belt installation ( for children weight bewteen 9-18 kg)
• Pull the car belt and insert belt buckle into front side cover hole(picture1),
then across seat back and took out from the other side of cover hole
(picture 2), nally buckle up until heard "click" sound (picture 3).
• Please make sure car belt should be through red waist belt guide without
no twist.
• After installation, tighten car belt as arrow indicator direction (picture4).
• Pull the harness strap as far as you can, and open safety buckle of car seat,
then put children inside 5-point harness system and joint buckle clips until
heard" click" sound (picture 5).
• Watch your children 's feeling, adjust suitable harness tightness by pulling
adjusting strap and adjust headrest to right height (picture6).
To Next Page
Loading...
