Need help?Do you have a question about the Baby Lock Enlighten BLE3ATW-2 and is the answer not in the manual?
General| Differential Feed | Yes |
|---|---|
| Number of Needles | 1 |
| Stitch Types | Overlock, Rolled Hem, Flatlock |
| Stitch Width | Up to 7mm |
| Max. Sewing Speed | 1500 stitches per minute |
| Number of Threads | 3/4 |
| Stitch Length | 1 to 4 mm |
| Differential Feed Ratio | 0.7 - 2.0 |
Sets the machine to the correct position for threading loopers and needles.
Step-by-step instructions for threading the lower looper.
How to use the needle threader for left and right needles.
Adjusting looper thread tension for optimal stitch quality.
Procedure to remove fabric from stitch fingers.
How to use the stitch selector for different stitch types.
Procedure for re-threading loopers after a thread break.
Procedure for re-threading needles.
Adjusting the stitch width for different needle positions.
Adjusting the presser foot pressure for different fabrics.
Instructions for attaching and removing the presser foot.
Settings and threading for a 3-thread rolled edge.
Procedure to convert from 3-thread to 2-thread serging.
Steps to change from standard serging to wave stitching.
Using rolled hem for seaming sheer fabrics.
Creating a decorative lettuce edge finish.
Making belt loops and button loops with the serger.
Finishing seams in one operation for flexible results.
Using cover marks for accurate seam allowances.
How to thread lightweight specialty threads.
Procedure for changing threads on the machine.
Guidance for threading medium weight specialty threads.
Instructions for replacing the upper cutting blade.
Step-by-step guide to remove and replace the needle plate.
Information on replacing the LED lighting unit.
Common problems with needle threading.
Common problems with looper threading.
Troubleshooting issues related to cutting blade performance.
To Next Page