To Next Page
I
imorrisSep 13, 2025
What causes layer slippage on my Baby Lock Sewing Machine?
- WwkelleySep 13, 2025
Layer slippage on your Baby Lock Sewing Machine can be caused by the foot pressure not being adjusted properly.
What causes layer slippage on my Baby Lock Sewing Machine?
Layer slippage on your Baby Lock Sewing Machine can be caused by the foot pressure not being adjusted properly.
General| Type | Mechanical |
|---|---|
| Stitch Count | 35 |
| Buttonhole Styles | 1-step |
| Needle Type | Universal |
| Stitch Width | 5mm |
| Stitch Length | 4mm |
| Automatic Needle Threader | Yes |
| Drop Feed | Yes |
| Built-in Needle Threader | Yes |
| LCD Screen | No |
| Foot Control | Yes |
Safety warning about electric shock hazards.
Safety warnings for preventing burns, fire, shock, or injury.
Identifies all machine components.
Explains how to store included accessories.
Procedures to detach and attach the extension table.
Explains the use of free-arm sewing for tubular items.
Steps to connect the sewing machine to the power supply.
Adjusting sewing speed with the foot control.
General operational guidelines for using the machine.
Procedure to sew in reverse.
How to adjust presser foot pressure for different fabrics.
Procedure to drop the feed dog for free-motion sewing.
Using the presser foot lifter.
Swapping presser feet.
Removing and attaching the holder.
Step-by-step guide to changing needles.
Chart for choosing appropriate needles and threads.
How to place the thread spool for winding.
Using the extra spool pin for bobbin winding.
Steps to remove the bobbin and cover plate.
Threading the bobbin holder correctly.
How to attach the hook cover plate.
Steps to thread the needle.
How to bring up the bobbin thread.
Step-by-step guide to using the needle threader.
Machine settings and steps for straight stitch.
Initial steps to begin sewing.
How to pivot fabric and change sewing direction.
Steps to finish a seam and cut threads.
Using guides on needle plate for seam allowance.
How to sew square corners using the cornering guide.
Machine settings and instructions for basic zigzag stitch.
Machine settings and instructions for overcasting stitch.
Settings for the overedge stitch.
Settings for the tricot stitch.
Settings for the straight stretch stitch.
Settings for the zigzag stretch stitch.
Machine settings for decorative satin stitches.
Machine settings for decorative stretch stitches.
Settings for sewing buttons.
How to position the button on the foot.
Settings for automatic buttonholes.
How to place the button in the automatic buttonhole foot.
Settings for manual buttonholes.
Settings for corded buttonholes.
How to attach the zipper foot.
Steps to sew a zipper.
Settings for blind hemming stitch.
Settings for smocking stitch.
Settings for pin tucking.
Settings for shell tucking.
How to clean hook race and feed dogs.
Problems with needle or bobbin thread.
Problems with needle or stitch quality.
Problems with fabric feeding or machine function.
Problems with stitch patterns or buttonholes.
