Babylo Panorama XT - Product Care and Maintenance; Maintenance Procedures

chassis
x1
F
A
B C D
E G H
I
J
K L
M
front wheels
x2
rear wheels
x2
rear wheel axle
x1
bumper bar
x1
seat unit
x1
harness
x1
apron
x1
canopy
x1
seat liner
x1
raincover
x1
car seat
x1
car seat adaptors (set)
x1
31
Care
Parts List
2
Maintenance:
• The product requires regular maintenance to ensure correct and safe
• performance.
• Regularly inspect the wheels, locks, brakes, harness, catches, seat adjusters,
• joints and xings to ensure they are clean, operating correctly and in full
• working order.
• Replace tyres if they are excessively worn.
• Do not use this product if any part is broken, torn or missing and use only
• spares provided by the manufacturer.
• If parts become stiff or difficult to operate, ensure dirt is not the cause, then
• try a light application of a silicon lubricant, ensuring it penetrates between the
• components. Regular lubrication of moving parts will extend the life of your
• product and make opening and folding easier.
• Your pram should be serviced and reconditioned before using for a second
• baby, or within 18 months, whichever is sooner.
• After exposure to damp conditions, dry off with a soft cloth and leave fully
• open in a warm environment. Storing damp will encourage mildew to form.
• Store in a dry place.
• Do not leave in sunlight for prolonged periods as some fabrics may fade.
Cleaning:
• Spot or sponge clean fabrics with mild detergent. Use mild soap or upholstery
• shampoo. Wash separately. NEVER use bleach. Dry in shade thoroughly before
• reuse and avoid direct heat and sunlight. Do not iron. Do not dry clean.
• Wipe clean plastics and metals with damp cloth.
• Never clean any part of the product with abrasive, ammonia based, bleach
• based or spirit type cleaners.
• Ensure the product is fully dry before use or storage.
• Always ensure the product is stored in a dry place to prevent mold or
• mildew developing.