Babylo Panorama XT - Pram Mode Configuration - Seat Unit Attachment; Attach Seat Unit to Chassis; Travel System Setup - Adaptor Attachment; Remove Seat Unit for Adaptors

2a. Press the button located on the side of the car seat and pull upwards to
remove.
2
1
2
2b. Lift lever both sides of the adaptors to remove the adaptors from the
chassis.
1
3a. Attach the seat unit to the chassis. Line up the seat connectors with the
chassis housing and press downwards. Listen for a “click” to signal correct
assembly.
Pram Mode
26 7
Travel System
3b. Lift lever both sides of the seat connectors to remove the seat unit from
the chassis.
2
1