2. Attach the rear wheel axle (D) to the rear of the chassis. Push down until
you see the silver locking pins lock into place and you hear a “click”.
D
3a. Push each rear wheel (C) into the sides of the rear wheel axle until you
hear a “click”. Give them a tug to ensure they are attached securely.
3b. To remove the rear wheels, simply press the grey button located on the
rear wheel axle and pull the wheel off.
C
Safety
4 29
Chassis Assembly
WARNING! Read these instructions carefully before assembly and use and
keep for future reference. The child may be hurt if you do not follow these
instructions.
This product is suitable for one child from birth (max. weight 15kg).
Suitable from birth in pram mode up to a maximum weight of 9kg or until
the child can sit up unaided, roll over or push itself up on its hands and
knees.
Follow suitability recommendations given in the separate infant car seat
instruction manual.
WARNING! Follow the manufacturer’s instructions.
WARNING! Never leave the child unattended.
WARNING! Ensure all locking devices are engaged before use.
WARNING! To avoid injury ensure that your child is kept away when
unfolding and folding this product.
WARNING! Do not let your child play with this product.
WARNING! Not suitable for children under 6 months in pushchair mode.
WARNING! ALWAYS USE THE HARNESS AS SOON AS YOUR CHILD CAN
SIT UNAIDED.
WARNING! Always use the crotch strap in combination with the waist belt
section of the harness.
WARNING! Check that the pram body or seat unit attachment devices are
correctly engaged before use.
WARNING! This product is not suitable for running or skating.
WARNING! Do not let other children play or hang on the product.
WARNING! Do not use this product if any part is broken, torn or missing.
IMPORTANT:
RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
To Next Page
