Need help?Do you have a question about the BAC 3000 Series and is the answer not in the manual?
General| Series | 3000 Series |
|---|---|
| Category | Desktop |
| Graphics | Integrated Intel UHD Graphics |
| Operating System | Windows 10 Pro |
| Ports | USB 3.0, HDMI, DisplayPort, Ethernet, Audio |
Adequate precautions for installation and location to safeguard equipment, premises, and public.
Details on how BAC Cooling Towers are factory assembled for uniform quality and minimum field assembly.
Procedure to thoroughly check delivered unit for required items and shipping damage before signing bill of lading.
Verification of section weights from certified drawings for rigging purposes.
Details on bolting the unit to support beams and considerations for proper operation and ratings.
Methods to protect products from damage and reduced effectiveness due to freeze-up.
Guidelines for positioning units to ensure adequate fresh air supply and prevent discharge air recirculation.
Reference to the Limitation of Warranties applicable at the time of sale/purchase.
Guidance to refer to the Operation & Maintenance Manual prior to start-up.
General instructions for lifting and handling units using spreader bars and safety slings.
Procedures for assembling single-cell cooling tower units, including two-piece section assembly.
Procedures for assembling multi-cell cooling tower units, including flume box installation.
Step-by-step guide for installing flume boxes to equalize water level in multi-cell basins.
Instructions for installing optional closure plates to isolate individual cells for maintenance.
Instructions for installing fan guards, emphasizing safety precautions during operation.
Guidance for installing top inlet piping, including dimensions and support considerations.
Details on electrical conduit routing and motor placement for various fan systems.
Installation instructions and warnings for the ENDURADRIVE™ Fan System with VFD.
Steps for installing the optional Whisper Quiet Fan, including handling and torque specifications.
Installation of the optional side outlet depressed sump box for water outlet connections.
Installation of the optional factory pre-wired terminal box for fan motor and switch wiring.
Guidance on installing pre-assembled optional accessories based on customer information packet.
To Next Page
