Need help?Do you have a question about the BAC S15E-1218-10 Series and is the answer not in the manual?
General| Brand | BAC |
|---|---|
| Model | S15E-1218-10 Series |
| Category | Air Conditioner |
| Language | English |
Adequate precautions for installation and location to safeguard equipment, premises, and public.
Refer to Table 1 and Figures 1 & 2 for minimum spreader bar and vertical dimension 'H'.
Single cell units are designed to be lifted in one assembled piece as shown in Figure 1.
Instructions for positioning, sealing, and securing upper section onto lower section for two-piece units.
Follow submittal drawings for cell orientation; multi-cell units may use flume boxes.
Assemble first cell's lower and upper sections, then subsequent cells adjacent to previous ones.
Instructions for mounting the fan guard securely in place before operation.
Reassemble safety cage if in pieces, then bolt to ladder using specified hardware and locations.
Install davit arm brackets, socket assembly, and davit arm for motor removal, with operating instructions.
Plan panel location, mount panel, and connect incoming power and heater power conduits.
To Next Page
