Bacharach FYRITE Gas Analyzer CO2 and O2 Indicators - Page 31

Instruction 0011-9026 Page 27
ASPIRATOR BULB SHOULD
REMAIN FIRM WHEN SQUEEZED
RUBBER CONNECTOR TIP
(HOLD FINGER HERE)
CHECK FOR BULB INFLATION
AFTER SQUEEZING
SAMPLING TUBE END
(HOLD FINGER HERE)
Figure 27. Testing Sampling Assembly (outlet side) for leaks.
Figure 28. Testing Sampling Assembly (inlet side) for leaks.
Figure 29. Removing End Plugs from Saturator Filter Tube.