PRODUCT BULLETIN
Bacharach | THE MEASURABLE DIFFERENCE | New Kensington, PA, USA | Dun Laoghaire, Ireland | Toronto, Canada | mybacharach.com
Acknowledging Alarms (Monitor in Manual Acknowledge Mode)
Responding to Alarms (Manual Latching Mode)
An operator can respond to the alarms by accessing the Alarm Summary Screen. Navigate to
this screen by selecting ALARM on the first (Data Display) screen. To further investigate an
alarm, press the ENTER key to go to the Alarm Detail Screen.
The Alarm Summary Screen displays a list of all alarm conditions pending across the network.
The screen is divided into 8 boxes, and each box represents a single alarm. If more than eight
alarms are pending, the MORE option will be displayed at the bottom of the screen to permit
access to that additional information.
Each box displays the zone number, zone name, and the current PPM reading. A flashing box
indicates an alarm that has not been acknowledged. A static box represents an alarm that has
been acknowledged, but has not yet been cleared from the system. Select the zone to be
acknowledged and press ENTER. This will take you to the alarm detail screen for that zone.
To Next Page
Loading...
Need help?
General
