PRODUCT BULLETIN
Bacharach | THE MEASURABLE DIFFERENCE | New Kensington, PA, USA | Dun Laoghaire, Ireland | Toronto, Canada | mybacharach.com
Once all of the alarms associated with a given MZ monitor are acknowledged, its red LED will
turn off, and any external alarms connected to the MZ relays will deactivate. All pending alarms
across the entire network must be acknowledged before the Remote Display returns to normal
operation. Once that occurs, its red LED will turn off, and any associated external alarms
connected to the RD relays will deactivate.
Keep in mind that the system will continue to generate new alarms if PPM values above the
alarm thresholds are detected.
To Previous Page
Loading...
Need help?
General
