Instructions For Mounting Power Trucks Item #88999 To New LS Shay
BACHMANN INDUSTRIES, INC.
1400 East Erie Avenue
Philadelphia, Pennsylvania 19124 USA
800-356-3910
www.bachmanntrains.com
Printed in China
G821X-IS008
CONTACT
TO TRACK
CONTACT
TO MOTOR
CONTACT
TO TRACK
REMOVE
PCB UNDER BOLSTER
OLD SHAY CONTACT
PLATE PCB
OLD SHAY CONTACT
PLATE PCB
PCB UNDER BOLSTER
4 points contact plate
assembly for new Shay
CONTACT
TO MOTOR
(IN ACCESSORY BAG)
CONTACT
TO TRACK
CONTACT
TO MOTOR
CONTACT
TO TRACK
REMOVE
4 points contact plate
assembly for new Shay
(IN ACC. BAG)
(IN ACC. BAG)
CONTACT
TO MOTOR
(IN ACCESSORY BAG)
1. Remove screws"C" to change power trucks for the Shay
2. When necessary, remove screw"D" to change top plate
& contacts assembly
SCREW "C"
1
SCREW "C"
1
(IN ACCESSORY BAG)
SCREW & WASHERS "D"
2
(IN ACCESSORY BAG)
SCREW & WASHERS "D"
2
Note: For new Shay, you need to remove the "old Shay contact
plate PCB" from the top plate, and fit the "4 points
contact plate assembly"(in acc. bag) to the top plate.
To Previous Page
Loading...
