Bachmann E-Z Command Plus User Manual

Bachmann Trains is pleased to bring you E-Z Command® Plus. With E-Z Command®, digital control of speed, lighting, sound, and
direction of multiple locomotives is possible, as well as remote control of Bachmann’s E-Z Command® DCC-equipped turnouts.
E-Z Command® simplies the programming process for locomotives with one-button, on-track programming. Other features include
128-speed steps for smooth operation and plug-in wiring for simple setup. E-Z Command® will operate all DCC-equipped Bachmann
locomotives as well as NMRA compliant DCC-equipped locomotives from many other manufacturers.
Your E-Z Command® Plus Digital Command Control System consists of the following components:
• E-Z Command® Plus Control Center
• 1 Red E-Z Track® Track Power Wire
• Wall-pack Power Supply
With plug-and-play capability, E-Z Command® is simple to set up and use, whether you’re operating an existing model railroad or building
an entirely new layout. To ensure trouble-free operation, we recommend that you read this manual completely before using your system for
the rst time.
Important Notice
Do not connect the E-Z Command® Plus Control Center to the wall-pack power supply until you have connected the control center to
your track. Multiple dial turns required to bring locomotive up to speed.
Setup and Programming Instructions
CAUTION-ELECTRICALLY OPERATED PRODUCT
NOT RECOMMENDED FOR CHILDREN UNDER 14 YEARS OF AGE. AS WITH ALL
ELECTRIC PRODUCTS, PRECAUTIONS SHOULD BE OBSERVED DURING HANDLING AND USE
TO PREVENT ELECTRIC SHOCK. INPUT: 120 VAC 60Hz 22W. OUTPUT: DC 16V 1000mA 16VA
1

Bachmann E-Z Command Plus Specifications

General

Max Locomotives	Up to 10
Control Method	Digital
Number of Throttles	1
Direction Control	Yes
Speed Control	Yes
Type	Digital Command Control (DCC)
Track Compatibility	DCC
Scale	HO, N
Accessory Control	Yes
Amperage	1.5 Amps

Summary

E-Z Command Plus Product Overview

Setup and Programming Instructions

Instructions for setting up and programming the E-Z Command Plus system for locomotive control.

Track Connection Guide

Connecting Bachmann E-Z Track

Steps for connecting the E-Z Command Plus system to Bachmann's E-Z Track system.

Connecting Other Track Systems

Powering Up the Control Center

Programming Locomotives to Addresses

Default Addresses and Programming Basics

Information on default locomotive addresses and the initial programming process.

Programming Track Requirements

Guidelines for setting up a temporary track for programming DCC locomotives.

Step-by-Step Locomotive Programming

Detailed procedure for assigning a new address to a DCC locomotive.

Consisting Locomotives

Programming Forward and Reverse Operation

Understanding Locomotive Direction

Changing Locomotive Direction

Step-by-step guide to reversing a locomotive's forward and reverse direction settings.

Running Multiple Locomotives

Simultaneous Locomotive Operation

Instructions for operating several locomotives independently on the track.

Emergency Stop Features

Global Emergency Stop

How to stop all trains simultaneously using the main STOP button.

Individual Locomotive Emergency Stop

Procedure to stop a single locomotive using the speed control dial.

Programming User-Installed Decoders

Need for a Programming Track

Creating a Programming Track

Using the Programming Track

Steps to program user-installed decoders on the created programming track.

Function Mode Operations

Introduction to Function Mode

Activating Function Mode

Using Function Pages and Buttons

Operating E-Z Command Turnouts

Controlling Turnouts

Programming E-Z Command Turnouts

Turnout Programming Introduction

Step-by-Step Turnout Programming

Detailed guide for assigning new addresses to E-Z Command turnouts.

Tips and Troubleshooting

Troubleshooting Checklist

Common issues and checks to perform if the train does not respond to commands.