Bachmann WOWSound SC-44 - Sound Features; Throttle Modes

Sound Features:
ï:DPSOLĆHUIRUSRZHUIXOVRXQGLQD
small package
• True CD-Quality Audio - WOWSound
®
is
the ONLY decoder with 16-bit 44,100Hz
DXGLRĆOHVIRUXQSDUDOOHOHGĆGHOLW\
• Load-Based motive power sounds that
adjust automatically to the load, speed,
and track conditions on your layout
• Variable length horn/whistle sound for
custom signalling
• A large number of sound variations to
make MUs more enjoyable
• Function page mapping that allows you
to control all 28 functions with just
buttons 0-9
Throttle Modes:
TCS WOWSound
®
decoders offer
multiple throttle modes to change the
response of certain sound functions
to match your preferred method of
operation. You may change the active
mode by using Audio Assist
®
. More
information on each throttle mode can
be found on TCS’ website tcsdcc.com.
Traditional Throttle Mode is the default
throttle mode active on your SC-44
Charger model out of the box. This
throttle mode mimics the “traditional”
behavior of a DC locomotive where
momentum values are very low, meaning
the throttle response is very fast.
Additionally, the prime mover notch will
be determined exclusively by speed.
Prototype Throttle Mode will add more
realistic momentum to your locomotive,
meaning you should use the train brake
or dynamic brakes to bring your engine
to a stop. In prototype mode, the notch of
the prime mover will dynamically react to
the load placed on the locomotive.
Manual Notching Throttle Mode operates
just how it sounds. Automatic notching
is disabled, meaning you are in complete
control. Using the Manual Notching
buttons (Function 10 and Function 11),
you can shift the RPM of the prime mover
at will to any of the 8 notches.