Back to Basics cocoa grande User Manual

7
container. Put lid with scoop on mixing container, and run the appliance through
a complete cycle on “HEAT & HI SPEED.” After cycle, empty mixing container
through the dispensing valve and let air dry.
Cleaning the Dispensing Valve
To disassemble the valve for cleaning:
1. Remove the valve from the container by unscrewing the entire valve body
counter-clockwise.
2. Remove the cap by unscrewing it counter-clockwise.
3. Remove the stopper/stopper pin, spring, cap, and lever from the valve body.
Note: The stopper and stopper pin are tightly fit and need not be separated.
4. Compress the cap and stopper together to remove the lever and cap.
5. Clean all parts and reassemble in the order shown.
Lever
Cap
Spring
Stopper Pin and Rubber Stopper
Valve Body

Back to Basics cocoa grande Specifications

General

Brand	Back to Basics
Model	cocoa grande
Category	Blender
Language	English