Backyard Products GABLE - FASCIA TRIM INSTALLATION; PARTS REQUIRED FOR FASCIA TRIM; INSTALLING FASCIA TRIM

57
HS
HS
Flush
TRIM
PARTS REQUIRED:
x20
Flush
2" (5 cm)
BEGIN
¸
1
FINISH
Install fascia trim ush under roof panel (Fig. A) and endcaps at ends of rafters
(Fig. B).
Secure with 2" nails, as shown.
Repeat steps to install fascia trim on both sides.
Your fascia trim boards are now installed.
1 x 3 x 94-3/4" (2,5 x 7,6 x 240,6 cm)
x2
HS
Fig. B
DOOR
Fig. A