Backyard LIGHTNING RIDGE 2200159 User Manual

NOTE:
PLACE SECOND SLIDE RAIL ASSEMBLY OVER THE TOP OF THE SLIDE BED AND SLIDE SUPPORT TUBES. INSERT
THE SLIDE BED AND SLIDE SUPPORT TUBES INTO THE SLIDE CAVITY. MAKE SURE SLIDE BED IS INSERTED
WITHIN 1/8" (3mm) OF GROOVE BOTTOM.
FAILURE TO INSERT SLIDE BED PROPERLY MAY RESULT IN
INJ
URY OR AMPUTATION. EXPOSED SLIDE EDGES CAN BE SHARP AND BECOME
A LACERATION HAZARD IF THE SLIDE IS NOT PROPERLY ASSEMBLED.
TIP:
USE
A RUBBER MALLET TO FULLY SEAT
THE SLIDE BED INTO THE SLIDE CAVITY.
SIDE RAIL ASSEMBLY
SIDE RAIL
STEP 4 - SLIDE ASSEMBLY
72

Backyard LIGHTNING RIDGE 2200159 Specifications

General

Brand	Backyard
Model	LIGHTNING RIDGE 2200159
Category	Play Sets & Playground Equipment
Language	English