EasyManuals Logo

Bad Boy MZ MAGNUM User Manual

Bad Boy MZ MAGNUM
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
EPAGPAGE 22
6) Fill crankcase with approximately 2
quarts of new oil. Level should top of
indicator on dipstick.
7) Reinstall oil fill/dipstick and tighten
securely.
8) Start engine; check for oil leaks. Stop
Engine; correct oil leaks. Recheck oil
level.
9) Dispose of used oil and filter in
accordance with local ordinances.
The fuel filter is located in the fuel line about 12" from the
carburetor on the side of the engine. Replace the filter yearly.
Prior to the removal of the old filter, note the direction of fuel
flow as indicated on the filter. Have towels readily available n
order to quickly remove any fuel leakage. always use new
hose clamps and ensure the security of the new filter by
lightly pulling on each hose. Always preform maintenance
outdoors or in a well ventilated area. Do not smoke or allow
any open flames in the vicinity of any maintenance activities.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bad Boy MZ MAGNUM and is the answer not in the manual?

Bad Boy MZ MAGNUM Specifications

General IconGeneral
Horsepower25 HP
Deck Material7-gauge steel
Spindle MaterialAluminum
Blade Tip Speed18, 500 fpm
Cutting Width60 inches
Cutting Height1.5 - 4.5 inches
Warranty2-Year Bumper-to-Bumper / 3-Year Engine

Related product manuals