Bad Boy MZ MAGNUM User Manual

3.4 Changing the spark plugs and checking the spark plug gap:
1) Remove the wire on the spark plug and use a
13/16” socket to remove the spark plug.
2) Check the gap on the spark plug to verify that
it is 0.03 in using a feeler gauge.
3) If the spark plug is worn, overheated, wet or
carbon fouled replace the spark plug.
4) Install the plug into cylinder head and torque
to 16 ft*lbs. Be careful not to overtighten the
spark plug.
Page 28

Bad Boy MZ MAGNUM Specifications

General

Horsepower	25 HP
Deck Material	7-gauge steel
Spindle Material	Aluminum
Blade Tip Speed	18, 500 fpm
Cutting Width	60 inches
Cutting Height	1.5 - 4.5 inches
Warranty	2-Year Bumper-to-Bumper / 3-Year Engine