About the SMS commands in the charts below is presented as examples, please
use it according to your real situation. Read the cautions as below:
1). All the red letters in the SMS command should be in CAPS.
2). Add your country code before the phone number, such as”0044” in UK.
4). Do not leave any space in the SMS command.
5). Sending SMS command may have some cost which charged by your local
mobile operator. But dial to open the door is free of charge.
GSM/3G Gate Controller
Page 4
Other Settings
Function SMS Command Meaning
Change password 1234Pnew password Default is 1234 (4 characters)
Add new user 1234A002#044777777#
Add phone number to 2
nd
position of the user
list. From 001 – 200. The “001” is the Admin.
Check user’s
position
1234A005#
Check the 5
th
User’s Phone Number
Total 200 users: 001 - 200
Check user list 1234AL005#010# The Users from 5
th
to 10
th
in the user list.
Delete the user 1234A005## Delete the 5
th
user in the user list.
Set the
authorization
1234ALL# Anyone could open the door by SMS or CALL
1234AUT# Only authorized users could open the door
Set the relay time 1234GOT010#
The relay will close after 10s.
Relay time:000 - 900
Operate the door
by SMS
1234CC Open the door by SMS
1234DD Close the door by SMS
Check the device
status
1234EE Check the GSM signal and relay status
To Next Page
Loading...
Need help?
General