Page 5
GSM/3G Gate Controller
Turn off the device, and keep pressing the RESET button (Refer to the panel
sticker on page 3), then turn on the device (do not release the RESET button).
-
NOTICE: The RESET setting will reset all datas as default, but not delete the users
you had added to to the device before.
How to Reset the Device?
1234A002#0044777777#1809061005#1809072230#
’1234‘: The device password(default).
‘002’: The user was set as 2nd position on the authorized user list.
‘0044777777’: The user’s UK phone number.
‘1809061005’: 10:05am on 6th, Sep, 2018.
‘1809072230’: 22:30pm on 7th, Sep, 2018.
-
Meaning: The phone number ’0044777777’ could only open the door by SMS or CALL
during a specific time from
10:05am on 6th, Sep, 2018 to 22:30pm on 7th, Sep,
2018. After the deadline, this phone number could not open the door.
1234GON##
-
Meaning: When the user open the door, the device will not send notification message.
1234GOFF##
-
Meaning: When the door is closed, the device will not send notification message.
Set the Valid User In A Specific Time?
Disable the Notification Message of the Relay Status?
To Next Page
Loading...
Need help?
General