19
Hold to enter walking assistant mode. The e-bike will go on at a
uniform speed below 6 KM/H. Release
, the e-bike goes back to
previous state, interface is as below:
Walking assistant mode
Warning：walking assistant function can only be used when the user is
pushing the e-bike. Please don’t use this function during riding.
When the surrounding light is not enough or in the evening,turn on the
backlight. Hold
0.5s to switch on the backlight. Hold 0.5s
again to switch off the backlight.
When the battery capacity is overvoltage, the four battery segments
are all lighted and the battery display frame will flash. When the
2.7.2 Walking Assistant
2.7.3 Backlight turn On/Off
2.7.4 Electric capacity display
To Next Page
Loading...
