23
below:
"3":riding distance reset
In the state of parameter setting, hold
and for 3s to save the
current settings and exit the setting interface.
Attention: With no action for 5 seconds, it will exit the setting interface
automatically, and the adjustment will not be saved.
Hold
for 3 seconds to switch off display.
Power will be switch off automatically with no action of e-bike for 5
minutes.
Suggestion: Switch off the battery and storage it in a right way, if the
e-bike won’t be used.
If any errors appeared in electronic control system, the display will
show the error code automatically. For example:
2.10 Malfunction Code
2.8.4 Exit the setting state
2.9 Power off
To Next Page
Loading...
