13
BF-UM-C-DP C171-EN November 2019
USER MANUAL FOR DISPLAY
7.7.2.11 Battery Information
When the system is on, quickly press
(<0.3S) the button twice to access
the “MENU” interface, repetitively press the
button until the “b01” appears on the
display (as shown below). You can briefly
press (0.3s) to view all information of
the battery.
Once you have viewed your desired informa-
tion, press (<0.3S) the button twice to
save and return to the main screen, or you
can press (<0.3S) the button once to
enter next item "Message of Error Code".
Content Explanation
b01 Current temperature (°C)
b04 Voltage (V)
b06 Discharge (A)
b07 Remaining Capacity (A/h)
b08 Total Capacity (A/h)
b09 Relative SOC (%)
b10 Absolute SOC (%)
Content Explanation
b11 Charging cycles (number)
b12 Maximum not charging time (Hr)
b13 Recently not charging time (Hr)
d00 Number of battery cell
d01 Voltage of cell 1 (m/V)
d02 Voltage of cell 2 (m/V)
dn Voltage of cell n (m/V)
NOTE: If no data is detected, "--" is displayed.
7.7.2.12 Message of Error Code
When the system is on, quickly press
(<0.3S) the button twice to access
the “MENU” interface, repetitively press the
button until the “E00” appears on the
display (as shown below). You can briefly
press (0.3s) to view last ten Error Code
“EO0” to “EO9”. Error code "00" means that
there is no error.
Once you have viewed your desired informa-
tion, press (<0.3S) the button twice to
save and return to the main screen.
To Next Page
Loading...
Need help?
General
