5
DEALER MANUAL FOR MOTOR
BF-DM-C-RM G062-D-EN November 2019
5. Mount the 2mm washer on both sides of
the frame.
6. Tighten the flange nuts with open spanner
at both sides of the motor. (torque require-
ment: 47-60 N.m.)
6.4 MAINTENANCE
• Maintenance must be carried out by autho-
rized personnel with the correct equipment.
• Do not disassemble the motor.
• Do not use thinners or other solvents to
clean the components. Such substances can
damage the surfaces.
• Avoid water submerging, to keep the com-
ponents protected.
• Avoid using high-pressure cleaning jets.
• For prolonged storage, turn off the battery
and avoid storing near heat sources.
To Next Page
Loading...
