What to do if my Bailey Control Unit is blinking green?
If your Bailey Control Unit is blinking green, it means a nonfatal error has occurred, such as a self-test routine failure or NVRAM error. First, ensure the system is shut down or in a safe state. Then, push the RESET pushbutton. The module will then be in ERROR mode. Use a configuration tool to obtain the status word indicating the error. Refer to Table 5-2.
Why is my Bailey Control Unit showing a solid red light?
A solid red light on your Bailey Control Unit indicates a fatal error has occurred. Replace the module or contact your nearest Bailey Controls representative.
How to fix a Bailey Control Unit that is off?
If your Bailey Control Unit is off, it indicates a microprocessor or related hardware failure. Replace the module or contact your nearest Bailey Controls representative.
Equipment environment and handling precautions.
Critical safety alert for dipshunt installation.
General introduction to the Logic Master Module (LMM) and its functions.
Specifies the target audience for this manual.
Details the features, capabilities, and architecture of the LMM.
Explains how the LMM is used in control strategies and system integration.
Outlines the manual's structure and the content of each section.
Guidance on navigating and effectively utilizing the manual's information.
Lists relevant companion manuals and technical documentation.
Defines technical terms and acronyms used throughout the manual.
Lists hardware components and their corresponding part numbers.
Provides detailed technical data and operating parameters for the LMM.
Overview of the section's content regarding LMM functions and operation.
Describes the main operational sections and internal circuitry of the LMM.
Explains the LMM's communication with other INFI 90 system modules.
Details the LMM's communication with digital slave modules.
Describes the types, capacities, and functions of onboard LMM memory.
Explains the function and conditions that trigger the MFT.
Details the on-board digital input and output capabilities.
Covers module security and control input security features.
Explains how to define LMM operations using function codes.
Describes the range, purpose, and outputs of LMM function blocks.
Lists and describes available software algorithms for LMM configuration.
Outlines essential procedures for LMM installation prior to operation.
Precautions for handling Electrostatic Sensitive Devices (ESD).
Steps for examining and verifying hardware integrity after shipping.
Procedures for setting switches, jumpers, and mounting the module.
Configuration of operating states and unique module address.
Configuration of input signal types (VDC, VAC) for digital inputs.
Steps for inserting the module into the Module Mounting Unit (MMU).
Details the interface between process I/O and the LMM.
Connecting the LMM to slave modules via the MMU backplane.
Details connections for power, communication, and signal pathways.
Describes specific cables used for I/O to LMM connectivity.
Process of defining LMM operations after physical installation.
Overview of operating modes, indicators, and start-up procedures.
Explains Execute, Configure, and Error modes of the LMM.
Describes front panel indicators for visual module status indication.
Details the function and meaning of input and output LEDs.
Procedure for resetting the module and its effect on operation.
Steps to follow for the initial operation of the LMM.
Overview of error indications and corresponding corrective actions.
How to identify and resolve operational issues and errors.
Details status LED and other indicators for diagnostics.
Interpretation of status byte data for detailed diagnostics.
Detailed pin assignments for all LMM module connectors.
Information on the limited maintenance requirements of the LMM.
Recommended periodic maintenance tasks and intervals.
Explains procedures for replacing a faulty Logic Master Module.
Step-by-step guide for module replacement without special tools.
Overview of available support services from Bailey Controls.
How to order spare parts and required information.
Information on service and repair training courses offered.
Guidance on obtaining additional manual copies.
General| Brand | Bailey |
|---|---|
| Model | Infi 90 IMLMM02 |
| Category | Control Unit |
| Language | English |
To Next Page
