4-19
Caravan Equipment
4
1. Set energy selector switch (A) to 12V.
2. Operating display “C”, 12V lights “green”.
Appliance is in function.
4.11.4 Energy Selection
12V Electrical Operation (DC)
▲ The refrigerator should only be used while the motor is running, otherwise the on-board-
battery would be discharged within a few hours!
Mains Power
This option should only be selected where the supply voltage of the connection for power supply
corresponds to the value specified on the data plate. Any difference in values may result in damage to
the appliance.
Gas Operation
The ignition process is activated automatically, accompanied by a ticking sound approx. 30 sec. Upon
successful ignition, the display LED (C) “Gas” lights yellow. The refrigerator is in function. Use rotary
switch (B) to regulate the temperature in the main refrigerator compartment.
3. Use rotary switch (B) to regulate the
temperature in the main refrigerator
compartment.
1. Open the valve of the gas cylinder.
2. Open the shut-off valve to the gas supply.
3. Set energy selector switch (A) to gas.
4. Set rotary switch (B) to “MAX” position.
1. Set energy selector switch (A) to 230V.
2. Operating display “C”, 230V lights “green”.
Appliance is in function.
3. Use rotary switch (B) to regulate the
temperature in the main refrigerator
compartment.
To Next Page
Loading...
