EasyManua.ls Logo

Baintech PowerTop V3 - Load Connection

Baintech PowerTop V3
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PowerTop V3 User Operation Manual
IMPORTANT NOTE: DC On/Off switch must be ON for load connections.
The Grey Anderson connector load output is protected by a 50A self-resettable thermal breaker. Maximum
recommended load as a guide is under 500W, dependent on ambient temperature.
Loads can also be connected to the following 12V DC Power sockets:
Ciga x 2 Maximum load/Socket 10A
Engel x 2 Maximum load/Socket 10A
USB x 2 Maximum load/Socket 5V /2.3A
Sockets output are protected by a 20A self-resettable thermal breaker. Maximum recommended load across all
sockets as a guide is 200W, dependent on ambient temperature.