EasyManua.ls Logo

Baintech PowerTop V3 - PowerTop Technical Information; Features; Specifications

Baintech PowerTop V3
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PowerTop V3 User Operation Manual
Features
• 12V 100Ah Gel battery
• Top of unit made from anodised aluminium
• In-built 6.6A AC connected battery charger
• In-built electronics (VCR) for accepting charge from vehicle input, for voltages above 13.2V
• LCD voltmeter with LOW volt (@ below 11.5 Volt) audio alarm buzzer
• Low Voltage Shutdown (@ below 11V)
• DC On/Off push button switch for the unit
• Total four 12V DC power socket outlets
o 2 x Engel Socket
o 2 x Ciga Sockets
o Protected by 20A thermal self-resettable breaker
o 2 x Universal USB Socket (5V/2.3 amp each)
• 6 LED indicators:
o MAINS o VEHICLE
o SOLAR/EXTERNAL
o BOOST
o FLOAT
o FLAT BATTERY
• Fitted 3x 50A Anderson type Connectors
o Red: Solar/External (12V solar panel input can be unregulated)
o Blue: Vehicle Charge Input connection
o Grey: Load connection to and from battery
▪ Protected by 50A thermal self-resettable breaker
▪ Can be used for external higher power regulated output from a AC charger, DC-DC charger or
solar charger to charge the battery
Specifications
Battery Type
12V/100Ah Sealed Lead Acid Battery
In Built Battery Charger
Mains input voltage
DC output voltage
6.6A 15V DC Charger
240V AC
15V DC
Vehicle input charging voltage
Cut-In Voltage Above 13.2V
Volt Meter, low voltage alarm indicator and audible alarm
Below 11.5V
System Shut Down Voltage
Below 11.0V & Above 15V
Socket Protection
20A Self-Resettable Breaker
Grey Anderson plug (output) protection
50A Self-resettable breaker
USB Socket Output
5V 2.3A
Maximum Load across all sockets
200W
Dimensions (L x W x H)
330 x 175 x 275 mm
Weight
32kg
Warranty
12 months
• After warranty period service is available.
• Opening unit voids warranty.