Baja motorsports DR50 User Manual

Follow all instructions when assembling this dirt bike. If any parts are damaged or missing, those parts must be replaced
before proceeding.
WARNING: To reduce the risk of injury, you must read and understand this assembly guide before attempting to
assemble this product.
ASSEMBLY GUIDE
GUÍA DE ARMADO
DIRT BIKE
MOTOCROSS
DR50
SAVE THIS GUIDE FOR FUTURE REFERENCE
Siga todas las instrucciones al armar este motocross. Si falta alguna pieza o hay piezas dañadas, dichas piezas deben
reemplazarse antes de proceder a utilizar el producto.
ADVERTENCIA: Para reducir el riesgo de lesiones, debe leer y comprender esta guía de armado antes de
intentar armar este producto.
GUARDE ESTE MANUAL PARA FUTURAS CONSULTAS

Baja motorsports DR50 Specifications

General

Brand	Baja motorsports
Model	DR50
Category	Motorcycle
Language	English

Summary

Symbols and Tools

Tools Needed for Assembly

Lists all necessary tools required for the assembly process.

Unpacking the Dirt Bike

Unpacking Safety and Steps

Key procedures and safety warnings for unpacking the dirt bike.

Loose Parts Identification

Parts List Verification

Comprehensive list of all included loose parts for verification.

Dirt Bike Assembly Procedures

Install Front Fender and Number Plate

Instructions for attaching the front fender and number plate.

Install Handlebars

Steps for mounting handlebars and verifying cable/hose routing.

Install Front Wheel

Procedure for mounting the front wheel with torque specifications.

Install Side Panels and Seat

Guide to installing side panels and securing the seat properly.

Engine Lubricant Procedures

Draining packing lubricant and refilling with proper engine oil.

Final Preparation and Checks

Verify Fluid Levels

Check all fluid levels before operating the unit.

Add Gasoline for Testing

Recommended gasoline type for initial testing purposes.

Complete Pre-Delivery Inspection

Final checks required before delivering the product to the customer.