Bajaj pulsar DTS-i - Page 227

Measuring & Testing Equipment : Multimeter
Fuel Gauge - Tank Unit
200 Ohms
Meter Range
As per chart
given below
White / Yellow
Meter +ve
Connections
Black / Yellow
Meter -ve
Standard Value
Empty Tank
Note: Before checking the above, please confirm
• Battery Voltage
• Speedometer coupler & fuel gauge tank unit coupler connection is firm.
Standard Value : (For 150 CC & 180 CC)
Fuel Level Fuel Quantity Standard value Graphical Bar on
Instrument cluster
Empty Tank 1.25+0.3 Liter 93~101 Ohm 0 Bar
Reserve 2.8 Liter 67~77 Ohm 2 Bars
Just Above Reserve 3.5 Liter 58~62 Ohm 3 Bars
Half Tank 4.5 Liter 36~44 Ohm 4 Bars
Full Tank 8.5 Liter 6~10 Ohm 6 Bars
Full Tank
Note: Before checking the above, please confirm
• Battery Voltage
• Speedometer coupler & fuel gauge tank unit coupler connection is firm.
ELECTRICAL CHECKING
PROCEDURES
Measuring & Testing Equipment : DC Clamp Meter
Horn
200 DC A
Meter Range
2.2 Amps
Encircle clamp meter jaws
around Brown wire of horn
Connections Standard Value
SOP :
• Encircle clamp meter jaws around Brown wire of Horn.
• Press horn switch & drawn by horn.check instantaneous current
Pulsar 150/180 DTS-i
Service Station Manual
223
Dealer Development Center
Akurdi Pune