TECHNICAL SPECIFICATIONS - 180 CC
Pulsar 150/180 DTS-i
Service Station Manual
26
Dealer Development Center
Akurdi Pune
Engine and Transmission
Type : Four stroke DTS-i, Natural air cooled.
No. of cylinders : One
Bore : 63.50 mm.
Stroke : 56.40 mm.
Engine displacement : 178.60 cc
Compression ratio : 9.5 0.5:1
Idling Speed : 1400 100 rpm.
Max. net torque : 14.22 Nm / 1.45 Kgm @ 6500 RPM
Ignition System : Microprocessor controlled digital C.D.I.
Carburettor : UCAl-MIKUNI BS29, Side Drought, CV Type.
Spark Plug : 2 Nos. Champion RG4HC (Resistive)
+
+
Max. net power : 12.52 KW (17.02 Ps) @ 8500 RPM
Ignition Timing : 10 BTDC at 1400 rpm, 25 BTDC at 3000 rpm.
Fuel : Unleaded petrol
Spark Plug Gap : 0.6 to 0.8 mm.
Lubrication : Wet sump, Forced.
Starting : Electric start.
Clutch : Wet, Multidisc type.
Transmission : 5 speed constant mesh.
Primary Reduction : 3.47 : 1 (66/19)
Gear Ratios: 1st gear : 26.93 : 1 (36/13)
2nd gear : 18.31 : 1 (32/17)
3rd gear : 13.43 : 1 (29/21)
4th gear : 10.54 : 1 (26/24)
5th gear : 8.98 : 1 (24/26)
Final drive ratio : 2.78 : 1 (39/14)
Frame Type : Double cradle.
Suspension Front : Telescopic Fr. fork with Antifriction bush (Stroke 130mm)
Rear : Trailing arm with coaxial hydraulic cum gas filled adjustable shock
absorbers, and triple rate coil springs.
Brakes Front : Hydraulically operated disc type.
Rear : Mechanically expanding shoe and drum type.
Tyres Front : 90 x 90 x 17, 49 P (Tubeless)
Rear : 120 / 80 x 17, 61 P (Tubeless)
Tyre Pressure Front : 2.00 kg/cm (28.4 Psi)
Rear Solo : 2.00 kg/cm (28.4 Psi)
Rear Pillion : 2.15 kg/cm (30.5 Psi)
Rims (Alloy Wheels) Front : 1.85 x 17
Rear : 2.50 x 17
00
2
2
2
CHASSIS & BODY
To Next Page
Loading...
