Bajaj pulsar DTS-i - Frequently Asked Questions (FAQs)

FREQUENTLY ASKED QUESTIONS - FAQ'S
Pulsar 150/180 DTS-i
Service Station Manual
37
Dealer Development Center
Akurdi Pune
Features
Cubic Capacity
Horse Power
Torque
DC Ignition
Starting Mechanism
Tubeless Tyre
Intelligent Digital CDI
ExhausTEC
Controlled Lubrication
Digital Control
Wheel Base
Front Suspension with
anti friction Bush
Rear Suspension with
Nitrox Shockers
LED Tail Lamp
Split Type Seat
Wheel Size (17")
Head Lamp Fairing
Decals
Clip on type Handle Bar
Elliptical type swing arm with
needle roller bearing
14.09 PS
Pulsar DTS-i 150 cc
149.01 cc
12.76
YES
Self & Kick Start
NO
YES
YES
YES
NO
1320 mm
YES
YES
YES
NO
YES
Head Lamp Fairing
NO
NO
17.02 PS
14.22 Nm
Pulsar DTS-i 180 cc
178.60 cc
YES
Self Start Only
YES
YES
YES
YES
YES
1350 mm
YES
YES
YES
YES
YES
Head Lamp Fairing
New decals to match to the profile of the vehicle
YES
YES
Ï What are other distinguish features of new ‘Pulsar DTS-i 180 cc’ motorcycle in comparison with ‘New Pulsar DTS-i
150 cc’?
Following are the overall features in comparison at a Glance.B
Ï What is the function of Battery icon popping up in speedometer?
B
B
B
The icon provided in the speedometer console indicates the status of battery. When the battery voltage drops down
bellow 11.9 volts then only it will pop up & warns the rider that battery needs charging.
What is DC Ignition & lighting system?
System works on DC electrical energy of battery. For Ignition system, supply comes from battery instead of exciter
coil located inside magneto. The vehicle battery is always kept charged by the magneto.
Can we ride the bike by removing the battery?
No, not at all. Disconnecting the battery from the vehicle will disable the starting / Ignition system & vehicle cannot
be started.
Ï
Ï