IMPORTANCE OF PM SCHEDULE EXECUTION
Pulsar 150/180 DTS-i
Service Station Manual
52
Dealer Development Center
Akurdi Pune
6. Remove 2 bolts securing ‘Bracket Clutch Cable’ & take out the clutch
cable end terminal from ‘Lever Clutch’.
7. Loosen & remove clutch cover bolts in crisscross pattern & take out
clutch cover.
8. Remove the bolts securing ‘Oil Pump Assembly’. Take out the ‘Oil Pump
Assembly’.
9. Remove the wire clip securing ‘Oil Strainer’ from the bottom end of ‘Oil
Pump Assembly’ & take out ‘Oil strainer’.
To Next Page
Loading...
