Bajaj pulsar DTS-i - Page 58

IMPORTANCE OF PM SCHEDULE EXECUTION
Pulsar 150/180 DTS-i
Service Station Manual
54
Dealer Development Center
Akurdi Pune
Centrifugal Oil Filter Cleaning
1. Remove two bolts securing right hand side foot rest.
2. Take out the foot rest.
3. Remove bolt securing kick lever.
4. Take out kick lever from kick shaft.
5. Remove phillips screw securing ‘Cover Starter Motor’ & take out the
cover.
6. Remove 2 bolts securing ‘Bracket for Clutch Cable’.
7. Take out the clutch cable end terminal from ‘Lever Clutch’.