Bajaj pulsar DTS-i - Page 60

Pulsar 150/180 DTS-i
Service Station Manual
56
Dealer Development Center
Akurdi Pune
12. Replace gasket by new one.
13. Apply 0.5 Kgm torque while refitting.
14. Replace clutch cover gasket by new one.
Required Special Tools & Equipment
Phillips Screw Driver Nylon Brush Torque Wrench
T-Spanner
15. Tighten clutch cover bolts in crisscross sequence.
16. Apply specific torque to clutch cover bolts.
IMPORTANCE OF PM SCHEDULE EXECUTION