Pulsar 150/180 DTS-i
Service Station Manual
60
Dealer Development Center
Akurdi Pune
IMPORTANCE OF PM SCHEDULE EXECUTION
Silencer Drain Hole Cleaning
Clean the silencer drain hole by using
silencer drain hole cleaning tool as
shown in photograph.
Nitrox Rear Shock Absorber
Adjusting Spring Tension
• RSA spring tension can be adjusted with the help of 5 stepped adjuster
cam to suit individual requirement as per load & road conditions.
• Turn the adjuster cam on each shock absorber to same required position.
Setting the adjuster cam to higher notch position increases the spring
stiffness & vice-versa.
• Shock absorbers adjusted either too soft or too stiff could adversely
affect riding comfort & vehicle stability.
If the Shock Absorber sleeves on both sides are not adjusted to the same
position, an unsafe riding condition may result.
Position
Spring Action
12345
Stronger
Note : Std setting is done in 1st notch
To Next Page
Loading...
