Pulsar 150/180 DTS-i
Service Station Manual
62
Dealer Development Center
Akurdi Pune
IMPORTANCE OF PM SCHEDULE EXECUTION
7. Set the air or VC screw to get CO value between 1.5 ~ 2.5 % at idling
RPM or 1400 100.+
8. Reconfirm the engine idling RPM & CO are within specified limit.
9. For getting better engine performance & optimum fuel efficiency, achieve
CO% as recommended.
Required Special Tools & Equipment
Tachometer CO Gas Analyzer Thermometer
Screw Driver Silicon Tube
To Next Page
Loading...
