Pulsar 150/180 DTS-i
Service Station Manual
70
Dealer Development Center
Akurdi Pune
IMPORTANCE OF PM SCHEDULE EXECUTION
Non Sealed Type Drive Chain Lubrication on Vehicle
1. Put vehicle on center stand. Normal dust should be wiped clean using a
lint free cloth (applicable for 1st Free service).
2. Lubricate chain with SAE 90 oil. Ensure oil is directed on to the ends of
the bushes & links on either side.
3. Rotate the rear wheel for proper lubrication of entire chain.
4. Wipe off excess oil or dripping oil & closed the window cover.
5. Adjust chain slackness as per specification.
Note :-
If drive chain is excessively dirty, then drive chain has to be removed &
cleaned using diesel & lubricated in greasilator using molten (IOC Servo
compound) chain grease.
To Next Page
Loading...
