SPECIAL TOOLS
Bearing Race Extractor
Drawing No : 37 00DJ 01
Application : Used for removing
the lower bearing race from ‘T’
Special Nut
Drawing No : 37 10DJ 43
Application : Used to remove / fit
of centrifugal oil filter nut.
Note : Existing tool can be used by
reducing diameter to 25.9 + 0.1 mm
Dia. = 25.9 0.1+
Bearing Extractor
Drawing No : 37 10DJ 76
Application : Used to extract the
input shaft brg. from crankcase
LH.
Bearing Puller
Drawing No : 37 10DJ 77
Application : Used to pull out the
bearing for body balancer from
crankcase LH.
Pulsar 150/180 DTS-i
Service Station Manual
93
Dealer Development Center
Akurdi Pune
To Next Page
Loading...
